XS650 Bolts

A lot of the stuff I post on here is data I collect and just want to know where to find it so I can reference back to it when I need it. I also figure it may be useful to you guys out there. Save you some time searching for it.

Reposted from THEXSCAFE

Next problem. List of required items. Went through an old engine. Put this list together…Haven’t checked it right through so may not be 100% correct. XS650E.

		5.0 x 0.8mm
Alternator Cover	2	5 X 10	Hex socket
Carb Top	8	5 x 16	Phillips
Washer	8	5mm	Plain

		6.0 x 1.0mm
HEAD:
Breather Box	4 4	6×60(large) 6×25(small)	Hex Socket
Points/ATU Cover	4	6 x 20
Bolt	1	6 x 35	Hex Bolt
Washer	1	6mm	Plain
Tri. Tappet Cover	9	6mm	Crown Nut
Washer	9	6mm	Plain
BARREL:
Cam Chain Adj	4	6 x 18	Hex Bolt
.. with shoulder	2	6 x 19	Hex Bolt
Washer	6	6mm	Plain
Front Guide	2 2	6×20 M10-special	Hex Bolt
Washer Washer	2 2	6mm/11mm	Copper-Plain
Carb Boot	4	6 x 20	Hex Socket
CRANKCASE:
Starter Cover	6	6 x 25	Hex Socket
Oil Sump Cover	6	6 x 25	Hex Socket
Gear Lever	1	6 x 20	Hex Bolt
ALTERNATOR  SIDECASE:	4	6 x 25	Hex Socket
	2	6 x 40	Hex Socket
CLUTCH  SIDECASE:	4	6 x 75	Hex Socket
	1	6 x 40	Hex Socket
	7	6 x 25	Hex Socket

		8.0 x 1.25mm
HEAD:
Squ. Tappet Cover	4	8mm	Crown Nut
Bolt	4	8 x 60	Hex Bolt
Bolt	2	8 x 35	Hex Bolt
Washer	10	8mm	Plain
CRANKCASE:
Bolt	2	8 x 75	Hex Bolt
Bolt	1	8 x 55	Hex Bolt
Bolt	1	8 x 90	Hex Bolt
Nut	8	8mm	Short Open
Nut	6	8mm	Long Crown
Washer	12	8mm	Plain
Kickstart	1	8 x 30	Hex Bolt
Starter	2	8 x 35	Hex Bolt
Starter	2	8 x 35	Hex Bolt-flank
Washer	4	8mm	Plain
Washer	4	8mm	Spring

		10 x 1.25mm
HEAD:	8	10mm	Crown Nut
Washer	8	22×10.5x4mm	Copper/Brass Plain
Banjo Bolts ..Oil	2	10mm Single
Washer	4	10mm	Copper Plain